26
Updates
The Settings menu includes an Updates sub-
menu. This controls how the box handles
automatic software updates which are
received via the aerial. These updates are
only downloaded when the box is in the
normal standby mode.
Auto: The box will automatically download
and install any updates received.
Manual: When you turn the box on for the
next time, an update notice will be shown on
screen. You can then choose to install the
update by pressing the OK button.
Press
►
and then the OK button to cancel the
update. The update will also be cancelled if
no keys are pressed within 5 minutes.
Operating the box
HDCP. If the broadcaster's transmission
indicates that copy protection must be
utilized, then the set top box will override
the user settings and HDCP will be enabled.
An HDCP compatible display device will be
required to view this content.
‘Digital Audio Output’ This option is used to
select compressed/uncompressed mode for
Digital Audio output.
Digital Audio output mode compressed
means compressed data is routed through
the Digital Audio output.
Digital Audio output mode uncompressed
means PCM data is routed through the
Digital Audio output.
‘SPDIF SYNC Delay’ SPDIF SYNC Delay
allows the user to adjust the delay in the
SPDIF audio output to sync between the
video and the SPDIF output audio.
To Next Page
Loading...
Need help?
General
