Technical data
·
· Electricity supply 220-240V AC (50Hz)
Gas intake connection 1/2" BSP
Auxiliary
Semi Rapid
Rapid
Wok
Injector
(mm)
0.90
1.18
1.55
1.70
Nominal Gas
Consumption
4.0MJ/h
6.9MJ/h
11.52
MJ/h
13.68
MJ/h
Natural Gas
1.0 kPa
Injector
(mm)
0.53
0.70
0.90
1.00
Nominal Gas
Consumption
3.6 MJ/h
6.3 MJ/h
10.0 MJ/h
13.2 MJ/h
Propane
2.75 kPa
Burner Type
Installation
Instructions for installation
This appliance shall be installed only by authorised persons and in
accordance with the manufacturer's installation instructions, local
gas fitting regulations, municipal building codes, electrical wiring
regulations, AS/NZS 5601 - Gas Installations and any other
statutory regulations.
Data Label -
The Data Label is located on the bottom of the
appliance.
A duplicate Data Label is supplied to adhere in an
accessible area next to the appliance.
This appliance is suitable
for
Natural Gas and Propane Gas;
ensure that the available gas
supply matches the Data Label and the gas type label.
Ventilation -
Ventilation must be in accordance with AS/NZS 5601
- Gas Installations.
In general, the appliance should have
adequate ventilation for complete combustion of gas, proper
flueing and to maintain temperature of immediate surroundings
within safe limits.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains
The Manufacturer.
declines all responsibility for any damage deriving from
installations in breach of the regulations in force or from failure to
comply with these installation instructions.
12
To Next Page
Loading...
