USING THE CONTROLS
Setting the Clock
When power is first supplied to the oven, the display on the control
panel will light briefly and 0:00 will begin blinking on the display.
The oven cannot be operated until the clock is set.
1. ‘0:00' will blink in the display when power is first supplied to the
appliance and shows the set hour.
2. Turn the Time / Temp / Function Control Knob to set the
hour of the day.
Example: to set 1:30.
Wait for about 5 seconds, the clock stops blinking and show the
set time.
3. Press the Time Button . The “ :00” will blink.
4. Turn the Time / Temp / Function Control Knob to set the
minute of the time.
5. Press the Time Button to finish setting the clock or wait for
about 5 seconds. The “ :30” will stop blinking. The display
shows the time of day. The appliance is now ready to use.
Use and Care
17
To Next Page
Loading...
