TechniSat DigiCorder User Manual

14
Fast Forward and Rewind
> During playback, press the blue function key Fast Forward or the red function key Rewind, several times
if applicable, to advance or rewind the track at 4x, 16x or 64x normal speed.
> During the 64x speed, press the blue or red function button to go forward or backward in 10 minute
steps.
> Once the desired section has been reached, you can access normal playback by pressing the yellow
function key.
Stop/End playback
> To stop playback and revert to normal operation, press the TV/Radio button.
Display control
To avoid the need to switch on the television set when navigating the MP3 playback, the latter can be
controlled via the display. An MP3 le is shown on the display with its respective lename. A folder will be
indicated by a display of square brackets, e.g. [Popmusic]. The hard drive will be displayed as hard drive
and a USB device will be indicated as USB-device1, USB-device2 etc.
> While the receiver is in stand-by mode, press the Language select key. The receiver will now switch
itself on, and will automatically call up the navigator in the Music category.
> Use the arrow keys up/down to select the source from which you wish to play back the MP3 les, and
conrm by pressing OK. If no USB device is connected to the system, only the internal hard drive of the
receiver will be available as a source.
> Now, rst use the arrow keys up/down to select the folder containing the desired MP3 le, and conrm
by pressing OK.
> Use the arrow keys up/down to select from the list the MP3 le you wish to play rst, and conrm by
pressing OK. The le selected will now be played. Thereafter the other les located on the same source
medium will be played automatically.
Playback/reproduction of pictures
You can use your receiver to display created images, as well as les, which are saved in JPG format on
the hard disk or on a device connected via the USB socket. The USB device should be formatted using
the le system FAT 32.
> During normal operation, press the green function key to open the PVR navigator.
> Press the red function key Category to open an additional window.
> Use the arrow keys up/down to highlight the line Pictures and conrm by pressing OK.
> Use the arrow keys up/down to select the source from which you wish to view the picture les, and con-
rm by pressing OK. A list showing the picture les available on the hard drive or the USB device will be
displayed.
> Use the arrow keys up/down to highlight the folder containing the desired picture le, and conrm by
pressing OK.
> Use the arrow keys up/down to select from the list the JPG le you wish to view, and conrm by press-
ing OK. The picture selected will now be displayed in large format.
Show next/previous picture
> Press the arrow keys up/down to skip to the next or previous picture.
Rotate image
> By pressing the blue or red function key, the image can be rotated in a clockwise or anticlockwise direc-
tion.

TechniSat DigiCorder Specifications

General

Teletext	Yes
Parental Control	Yes
Hard Drive	Yes (varies by model)
Functionality	Recording, Timeshift, Playback
Conditional Access	Common Interface (CI)
Connectivity	HDMI, USB, Ethernet, Scart
Tuner Type	DVB-S/DVB-S2
Video Decoder	MPEG-2, MPEG-4/H.264
Audio Decoder	MPEG
EPG	Yes