6
For daily use
Switching on and off
>
Press the On/Standby key either on the digital receiver or on the remote control to switch the receiver on.
> Press the same key again to switch the receiver off again.
Channel selection
Using the channel up/down keys
> Use the channel up/down keys on the remote control or on the receiver to move up or down the list, one
channel slot at a time.
Using the numeric keys
> You may use the numeric keys to enter the desired channel number. For example: 1 for channel 1
1, then 4 for channel 14
2, then 3, then 4 for channel 234
When entering a channel number consisting of several digits, you have approx. 3 seconds after pressing
each number to complete the entry. If you wish to enter a number consisting of only one or two digit/s, you
can speed up the switching procedure by holding the key down on the last digit.
Using the channel list:
> Press the OK key.
> Now use the arrow keys up/down to highlight the desired channel.
> Press the OK key to display the highlighted channel.
> Use the arrow keys up/down to move the highlighter in the list by one line at a time.
> Use the arrow keys left/right to move back and forth in the list one page at a time.
Return to the last channel selected
> Pressing the Back key on the remote control will take you back to the last channel selected.
> Press the key again to return to the channel previously selected.
Optional Features
Certain channels offer the possibility of optional features. This function makes it possible for you, e.g.
during a sports broadcast, to freely select from various camera perspectives (Form 1) or to select from a
range of different sporting broadcasts (Bundesliga football).
If a programme includes optional channels, this will be indicated.
> To select one of the possible options, press the option button. A selection window showing the available
options will be displayed.
> Use the arrow keys up/down to highlight the desired option, and conrm by pressing OK.
Select start time
On certain channels, you can select individual lms with different start times. These lms are available
on a round the clock basis at different start times. If a channel features selectable start times, this will be
indicated by a notication.
> To select one of the possible start times, press the option button. A selection window showing the start
times offered will be displayed.
> Use the arrow keys up/down to select the desired start time.
> Conrm by pressing OK. Provided the broadcast for the selected start time is available, you can view
this at the desired time.
To Next Page
Loading...
Need help?
General
