TechniSat DIGIPLUS UHD S

109
DE
EN
Selecting reception signals
Under this point in the installation wizard, select which types of reception you want
to use.
> Use the up/down arrow keys to select the reception signal you want to
switch on or o.
Satellite antenna (DVB-S / S2) for digital satellite channels;
Cable (DVB-C) for digital cable > IP channels;
Network (IPTV) for digital distribution stations
> Press the OK buon to open the selection window; highlight the seing you
want with the up/down arrow keys and close the window by pressing the OK
buon again.
> To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK buon.
The following steps depend on the choice of reception option.