TechniSat DIGIPLUS UHD S User Manual

117
DE
EN
11 Operation
11.1 Switching on
> Switch on the DIGIPLUS UHD S by pressing the On/Standby buon either on
the device or on the remote control. The power LED changes from red to blue.
11.2 Switching o
> Press the On/Standby buon either on the device or on the remote control to
switch the device o again.
> The device is now in ready mode (standby). This means that the time is
displayed on the device display panel (if activated). The power LED turns red
in standby mode.
The standby clock can be activated or deactivated under Menu > Seings >
Basic seings > Standby clock.
If the time is not shown despite the standby clock being activated, it means
that the device has not yet read it. To do this, switch the device on and set it
to receive e.g. ZDF for approx. 30 seconds to automatically read the time.
11.3 Selecting a channel
11.3.1 Using the channel up/down buons
> Use the up/down arrow keys to select a channel, or use the Channel +/-
buons on the remote control to scroll up or down one channel at a time.
11.3.2 Using the number buons
> Use the number buons to enter the number of the desired channel. For
example:
1 for channel slot 1
1, then 4 for channel slot 14
2, then 3, then 4 for channel slot 234
1, then 5, then 6 then 7 for channel slot 1567
When entering channel numbers with multiple digits, you have approx. three seconds
aer pressing a buon to complete the entry.
If you wish to enter a number consisting of only one, two or three digits, you can
speed up the entry procedure by keeping the buon pressed for longer on the last
digit or by pressing the OK buon.

TechniSat DIGIPLUS UHD S Specifications

General

Certification	CE
Package depth	195 mm
Package width	310 mm
Package height	80 mm
Package weight	1350 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Timer	Yes
Tuner type	Digital
Demodulation	8PSK, QPSK
Product color	Black
Interactive TV	-
Frequency range	950 - 2150 MHz
Number of tuners	2 tuner(s)
Audio output channels	- channels
On Screen Display (OSD) languages	CZE, DEU, DUT, ENG, ESP, FRE, GRE, HUN, ITA, POL, POR, RUS, SWE, TUR
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2
Signal source	Satellite
Supported video modes	576i, 576p, 720p, 1080i, 1080p, 2160p
Digital signal format system	DVB-S, DVB-S2
Audio formats supported	AAC, AIFF, FLAC, M4A, MP2, MP3, WAV
Image formats supported	BMP, GIF, JPEG, PNG
Video formats supported	ASF, AVI, M2TS, MKV, MOV, MP4, MPG, MTS, TS, TS4, VOB
Video compression formats	AVC, H.264, H.265, HEVC, MPEG1, MPEG2
Display type	LCD
Ethernet LAN data rates	1000 Mbit/s
AC input voltage	230 V
Power consumption	400 mA
AC input frequency	50 Hz
Power consumption (standby)	0.4 W
Power consumption (typical)	17.1 W
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Built-in HDD	No

Weight and Dimensions

Depth	175 mm
Width	220 mm
Height	40 mm
Weight	668 g