TechniSat DIGIPLUS UHD S

118
11.3.3 Using the navigator (channel list)
> Press the OK buon in normal operation (no display of the main menu / OSD).
The channel list navigator now appears. In TV mode, only TV channels are shown,
and in radio mode only radio channels are shown. The channel currently selected is
highlighted.
> You can view additional information about the current channel by pressing the
INFO buon.
> The reception source of the programme is shown to the right of the
programme by a corresponding pictogram.
11.3.4 Selecting the channel
> You can now highlight the desired channel using the up/down arrow buons,
the page up/down buons and the number buons.
> By pressing the OK buon, the highlighted programme is set and played, and
the channel list is hidden again.
11.3.5 Selecting the list
To make it easier for you to find channels, your device provides several channel lists.
You can select one of your favourites lists (TV list - TV list 16) and sort or filter the
channels according to the various criteria.
> Press the OK buon. The active channel list is now displayed.
> You can now open the desired channel list by using the Option selection
(OPT buon).