TechniSat DIGIPLUS UHD S

140
12.2 DVR playback
The DVR Navigator can be called up in the following ways. Depending on whether
you are in TV or radio mode, a list appears with all the available TV and radio
recordings saved on the storage device.
To do so, it is essential that you also observe the instructions and seings
regarding the global user-dependent parental controls in your instruction
manual.
The broadcast information can be displayed and hidden by pressing the Info
buon repeatedly.
> You can start to play back a recording by highlighting it and confirming with
OK.
12.2.1 When in TV mode
> In TV mode press theStop / DVRbuon to switch directly to the DVR
Navigator.
or
> Open the programme lists navigator by pressing the OK buon and switch to
the DVR Navigator by pressing the Stop/DVR buon.
or
> In the function selection select the Films / DVR item.
> Now retrieve the My Recordings folder on your connected recording medium.
12.2.2 From playback of a running / existing DVR recording
> Press the OK buon to open the DVR Navigator.
or
> In the function selection select the Films / DVR item.
> Now retrieve the My Recordings folder on your connected recording medium.