EasyManua.ls Logo

TechniSat DIGIPLUS UHD S

TechniSat DIGIPLUS UHD S
160 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
145
DE
EN
14.3 Switching between TV/Radio
> Using the 0 buon, retrieve the NAV menu.
> Now you can use the up/down arrow buons to highlight the desired
operating mode (TV or Radio) or Back to exit the menu again.
> Pressing the OK buon confirms the selection and switches to the selected
operating mode.
The unit switches to the last channel selected.
14.4 Volume control (ISI mode)
You have the option of adjusting the volume on your device. This facilitates operation,
as it means you can access all the major functions on a single remote control, and
will only rarely have to resort to using a separate remote control for the TV.
> Adjust the volume up or down using the Volume + rocker and the Volume -
rocker.
During volume adjustment, the currently set volume is displayed at the upper
edge of the screen.
When you switch on the device, sound will be reproduced at the volume level
last set.
14.4.1 Mute function
> By pressing the MUTE buon the sound is switched o or, if pressed again,
switched back on.
Throughout the time that the volume is switched to mute, the symbol
appears at the upper right of the screen.
14.5 Teletext (ISI mode)
Your device can display Teletext information on channels that broadcast Teletext
data.

Related product manuals