TechniSat DIGITRADIO 3

60
> Please note that the device feet could leave coloured marks on some types of
furniture surfaces, in certain situations. Place a protective layer between your
furniture and the device.
> Keep the DIGITRADIO 3 away from devices that emit intense magnetic fields.
> Do not place any heavy objects on the device.
> If you move the device from a cold environment to a hot environment,
moisture could accumulate inside the device. In this case, wait approximately
one hour before switching on.
> Route the mains cable in such a way that nobody can trip over it.
> Ensure that the mains cable or the power supply unit are always easily
accessible, so that the device can be quickly disconnected from the power
supply!
> The power outlet should be as close to the device as possible.
> When connecting to the mains, insert the plug fully into the socket.
> Use a suitable, easy-to-access mains connection and avoid using multiple
socket power strips!
> Do not touch the mains plug with wet hands; risk of electric shocks!
> In the case of a malfunction or the detection of smoke or odour from the
housing, remove the plug from the power outlet immediately!
> Remove the plug if the device is not going to be used for a prolonged period,
e.g. before going away on a long trip.
> If the device will not be used for a long time, remove the baeries, as they
could leak and damage the device. If the remote control range reduces,
change the baery.
> Excessive volume, in particular when using headphones, can damage the
hearing.
BDA_DIGITRADIO_3_V11.indd 60BDA_DIGITRADIO_3_V11.indd 60 10/11/2020 09:4510/11/2020 09:45