TechniSat DIGITRADIO 306 User Manual

- 5 -

Language
1. During System mode, turn the VOLUME/SELECT Knob to select Language and then press the
same knob to confirm.
2. Turn the VOLUME/SELECT Knob to change the display language of your choice.
3. Press the same knob to confirm.


Factory Reset
There may be times when you need to reset your unit back to the factory settings especially when
you have moved house. If you experience reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national DAB+ stations in that
area, your previously tuned channels may no longer be available.

1. During System mode, turn the VOLUME/SELECT Knob to select “Factory reset”, and press the
same knob to confirm. (F.3)
2. Turn the VOLUME/SELECT Knob to select <Yes>, and press the same knob to confirm or select
<No> to cancel. (F.4)
F.3
F.4








SW version
1. During System mode, turn the VOLUME/SELECT Knob to select SW version and then press the
same knob to confirm.
2. The software version will show on the display.

Sleep
This function allows you to program the unit to turn to standby mode by itself after a set period of
time.
1. During System mode, turn the VOLUME/SELECT Knob to select Sleep and then press the same
knob to confirm.
2. Turn the VOLUME/SELECT Knob to change the sleep time from: Sleep Off /10/20/30/60/70/80/90
minutes.
3. Press the same knob to confirm.
Alternatively,
Press the SLEEP button repeatedly to set the sleep time from: Sleep Off /10/20/30/60/70/80/90
minutes.

TechniSat DIGITRADIO 306 Specifications

Power

rated voltage	AC 100-240V ~50/60Hz
adaptor output	DC 9V 1.6A
power consumption	14.5W

Audio

audio output	1 X 5W RMS
frequency range DAB	174-240MHz
frequency range FM	87.5-108MHz

Weight and Dimensions

unit dimension	221 mm (W) x 159 mm (D) x 137 mm (H)
weight	~1.3 kg