TechniSat DIGITRADIO 306 User Manual

- 8 -

Audio setting
1. Press and hold the MENU/INFO button to access FM menu.
2. Turn the VOLUME/SELECT Knob to select “Audio setting” and then press the same knob to
confirm.
3. Turn the VOLUME/SELECT Knob to select “Stereo allowed” or “Forced mono” and then press the
same knob to confirm.

AUX operation


There is an “AUX IN” socket located at the back of the unit. Analogue audio sound signals from other
sources can be input to the unit through this socket.
1. Connect the input to another audio device via an AUX
cable (not included) with an “AUX IN” socket.
2. Press the MODE button repeatedly to select “Auxiliary
Input” mode. (F.5)
3. Turn the VOLUME/SELECT Knob to adjust the volume
control for your desired sound output level.
4. In AUX mode, operate your audio device directly for
playback features.


Setting the Alarm

This function allows you to program 2 individual Alarm in
a set period of time.
Press the ALARM button once or twice to select the Alarm
number (1 or 2) and then press Same knob to start the
setting of the alarm. (F.6)

Turn the VOLUME/SELECT Knob to select then press the
same knob to confirm.
F.5












F.6

On time
Alarm On time ##:##
Duration
15/30/45/60/90
Source
Buzzer/DAB/FM (DAB/FM: Last listened / Preset station)
Enable
Once/Weekends/Weekdays/Daily
Volume
Volume Bar
Alarm
On / Off

When the alarm is set, the alarm icon will appear on the display. To turn off the alarm when it sounds,
press the Standby or ALARM button.
During Standby mode, press the ALARM button repeatedly to turn the saved Alarm on or off. (F.7)

TechniSat DIGITRADIO 306 Specifications

Power

rated voltage	AC 100-240V ~50/60Hz
adaptor output	DC 9V 1.6A
power consumption	14.5W

Audio

audio output	1 X 5W RMS
frequency range DAB	174-240MHz
frequency range FM	87.5-108MHz

Weight and Dimensions

unit dimension	221 mm (W) x 159 mm (D) x 137 mm (H)
weight	~1.3 kg