54
> Use the Scroll&Select/Snooze knob to select one of the options:
DRC high - High compression
DRC low - Low compression
DRC o - Compression switched o.
> Confirm the selection by pressing the Scroll&Select/Snooze knob.
8.2.9 Deleting inactive stations
This menu item is for removing old stations and those no longer being received from
the station list.
> Select Main Menu > Delete Inactive Stations and press the Scroll&Select/
Snooze knob.
This is followed by the [Delete] prompt asking if the inactive stations are to be
deleted.
> Using the Scroll&Select/Snooze knob, select the [Yes] item and confirm by
pressing the Scroll&Select/Snooze knob.
8.2.10 Station sequence
The stations in the station list are usually displayed in alphanumeric sequence. If you
want to change this, please proceed as follows:
> Select Main Menu > Station Sequence and press the Scroll&Select/Snooze
knob.
> Select Alphanumeric, Provider or Valid and press the Scroll&Select/Snooze
knob to accept the seing.
9 FM mode
9.1 Switching on FM radio mode
> Switch to FM mode by pressing the MODE buon.
> [FM] is shown on the display.
When switching on for the first time, the frequency 87,5 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
Align the telescopic antenna to improve reception.
9.2 FM reception with RDS information
RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown on the display. The device can show the RDS information RT
(Radio text), PS (Station name), PTY (Programme type).