EasyManuals Logo

TechniSat TECHNIRADIO 5 IR Manual

TechniSat TECHNIRADIO 5 IR
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
61
DE
EN
NL
FR
PL
You can also use the WPS function in the network wizard. To do this first
select a WiFi network and then select the Press Buon or PIN option. You can
otherwise use Skip WPS to reach manual password entry.
To find out more about the current connection select Seings.
Select Manual seing, if you know your network parameters and would like to
configure them manually. Take note of the instructions on the display.
Select Delete network profile to delete connections no longer required.
If the network connection should be retained in standby, select Enable
Network Connection in Standby > Yes. However, doing so will increase the
power consumption.
12.3 Set-up wizard
On first switching on and aer a factory seings reset, the set-up wizard is
automatically launched.
> First select the Display Language and then > YES as soon as Perform now is
shown on the display.
If you select No, the wizard closes and you must perform the required seings
manually.
You will be taken through the seings in various steps.
> Under Time format, select the desired display format for the time display
(Section 12.1.3).
> During the next step you must select via which source the time is to be
synchronised (for more information refer to Section 12.1.2).
> You can then set up a WiFi network connection. For more details, see Section
12.2.
> Press theScroll&Select/Snooze knob to close the wizard when Set-up
Wizard Completed appears in the display.
12.4 Backlight
Under System seings > Backlight you can adjust the brightness of the display
for Operation and for Standby . You can choose between High, Medium and Low.
Confirm the selection by pressing the Scroll&Select/Snooze knob. Under Auto Dim
you can set the time aer which the display is automatically dimmed.

Table of Contents

Other manuals for TechniSat TECHNIRADIO 5 IR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TECHNIRADIO 5 IR and is the answer not in the manual?

TechniSat TECHNIRADIO 5 IR Specifications

General IconGeneral
Radio typePortable
Tuner typeDigital
DAB band range174 - 240 MHz
Supported radio bandsDAB, UKW
Radio Data System (RDS)Yes
RMS rated power10 W
Number of built-in speakers2
Display typeTFT
Display diagonal2.4 \
Ethernet LAN-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Headphone outputs1
Headphone connectivity3.5 mm
ColorationMonochromatic
Product colorBlack
Volume controlRotary
On Screen Display (OSD) languagesCZE, DEU, DUT, ENG, FRE, ITA, NOR, POL, SLV
Power sourceAC/DC
AC input voltage230 V
DC input voltage8 V
AC input frequency50 Hz
Battery capacity2000 mAh
Storage temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)5 - 90 %
Package typeBox
Package depth1500 mm
Package width3530 mm
Package height2400 mm
Package weight2270 g
Weight and Dimensions IconWeight and Dimensions
Depth1140 mm
Width270 mm
Height1180 mm
Weight1660 g

Related product manuals