TechniSat TECHNIRADIO 5 IR

59
DE
EN
NL
FR
PL
> Select Main Menu > System Seings > Time and Date and press the
Scroll&Select/Snooze knob.
> Use the Scroll&Select/Snooze knob to select the [Time/Date Seing] item,
then press the Scroll&Select knob.
> The first digits (day) of the date flash and can be changed using the
Scroll&Select/Snooze knob.
> Press the Scroll&Select/Snooze knob to accept the seing.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press the Scroll&Select/Snooze knob aer every additional seing in order to
go to the next seing.
> Proceed with the time in the same way as described above.
> Aer all seings have been made and the Scroll&Select/Snooze knob has
been pressed for the final time, [Time Saved] appears on the display.
12.1.2 Time update
Here you can specify whether time updates should be carried out automatically
via DAB+, FM or the Internet, or whether you wish to enter them manually (Section
12.1.1).
> In System Seings > Time and Date, select the [Time Updating] item.
> Use the Scroll&Select/Snooze knob to select one of the following options:
[Update from DAB] (Update via DAB+ only)
[Update from FM] (update only via FM)
[Update from Net] (update via Internet)
[No Updates] (time/date must be entered manually, see Section 12.1.1).
> Press the Scroll&Select/Snooze knob to save the seing.
12.1.3 Seing the time format
Under Set format you can activate the 12 or 24 hour format.
> Use the Scroll&Select/Snooze knob to select one of the following options:
[24 hours]
[12 hours]
> Press the Scroll&Select/Snooze knob to save.