42
Fault Possible cause Solution
Cannot receive channels that were
previously being received
Channel moved elsewhere Perform a search/scan
Channel no longer being broadcast None
Time not displayed while in
standby mode
Time not acquired Let e.g. ZDF run for approx.
30 sec
Standby is switched off Switch on standby clock
Text in e.g. Info box or SFIplus
detailed information is hard to
read at a distance
Character size set to "small" Adjust character size
USB device not recognized USB device formatted for wrong
file system
Format USB device for FAT32
file format
Device automatically switches off
after a certain time
Auto Standby function enabled Auto Standby setting - check and
deactivate if necessary.
PC cannot connect
to receiver; receiver cannot
connect to network
Wrong network settings Check network settings
Network cable connected
incorrectly
Check network connection
DVR recording
no longer possible
Selected storage medium is full Delete existing
recording(s)
Attach and configure
other storage medium.
To Next Page
Loading...
