EasyManuals Logo

TechniSat TECHNISTAR S6 How-To

TechniSat TECHNISTAR S6
3 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
After a few seconds, the search ends and the number of channels newly found will appear.
On this picture, 2 new channels were found.
7
To register the channels, select ‘Sort manually TV’ and press the OK button.
8
On the left of the screen, the search results will appear and to the right, your TV list will appear.
(Sometimes, other new channels will appear on the left side alongside JSTV HD channels.)
9
Select JSTV 1 HD and add the channel to your TV list on the right by pressing the yellow button
on your remote control. The channel will appear at the bottom of your list on the right side of the screen.
Repeat and add JSTV 2 HD to the TV list.
10
The new JSTV HD channel numbers will appear on the left side of the channel names. Note down the
channel numbers. In the picture below, the JSTV HD channels are added as No.11 and No.12.
11
Press Menu button to save your settings and exit Main menu. Press the channel numbers you have
noted in Step 11”, and please make sure if JSTV HD are shown.
12
You have successfully added the new channels!
Now you can edit the channels following the instruction below

Other manuals for TechniSat TECHNISTAR S6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TECHNISTAR S6 and is the answer not in the manual?

TechniSat TECHNISTAR S6 Specifications

General IconGeneral
Signal sourceEthernet (RJ-45), Satellite
Supported video modes576i, 576p, 720p, 1080i, 1080p
Digital signal format systemDVB-S, DVB-S2
Personal Video Recorder (PVR) included-
Tuner typeDigital
Product colorBlack
Number of tuners1 tuner(s)
Audio output channels- channels
On Screen Display (OSD)Yes
Audio formats supportedAAC, AC3, AIFF, FLAC, MP2, MP3, OGG, WAV
Image formats supportedBMP, GIF, JPEG, PNG, TIFF
Video formats supportedASF, AVI, M2TS, M4V, MKV, MOV, MP4, MPG, TS, TS4, XVID
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100 Mbit/s
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)4.8 W
Package weight1240 g
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width220 mm
Height45 mm
Weight600 g

Related product manuals