TechniSat TECHNISTAR S6

48
EN
> If you press the Fast Forward or rewind buon again, the search speed will
increase to 64x A message appears saying “Fast forward ▶▶▶▶” or “Rewind
◀◀◀◀”.
> By pressing the Fast Forward or Rewind buon again you can skip forwards
and backwards in 10-minute steps.
> When you get to the place you want in the recording, you can return to
normal playing mode by pressing thePlay / Pausebuon.
11.2.5 Seing tags
> Skip to a location in the recording as described above where you want to add
a tag.
> Pressing the Record buon sets a tag at the selected location.
Tags can also be set or edited manually or automatically during recording and
in theDVR recordingsmenu, where this is enabled in automatic programme
tagging.
11.2.6 Jump to tags
During playback you have the option of navigating directly to locations in the
recording where you have set tags.
> Using the Tag menu item in the Option selection, select the tag to skip to the
location you want in the recording.
11.2.7 Stopping playback
> Press the Stop buon to stop playback. Playback is ended and the receiver
reverts to normal mode. In doing so the receiver "takes note" of the place in
the recording where playback ended. If you start playing this recording again,
it will automatically resume at the point where you previously le o.
12 Encryption system
Under this menu item you can go to the submenus of the inserted smartcard and the
CI-/CI+ module.
> Retrieve the Main Menu > Encryption System.
> Select the inserted CI-/CI+ module ,or the smart card, to access its submenu
and to perform seings.
Please take into account that the submenus and seing options shown are
provided by the module or the smart card and could therefore dier.