TechniSat TECHNISTAR S6

49
EN
CAM-MHEG Autostart
If a CAM-MHEG application is available for an application, this can be started
automatically.
> Set the CAM-MHEG Autostart item to on or switch the function o.
PIN input
Here you can store a PIN for the respective CI slot/smart card. This PIN is required to
support DVR recordings with parental control restrictions.
This seing is only available if this function is supported by your CI/CI+
module/smart card.
Manually initialising the CI/CI+ module
> You can manually initialise the inserted CI/CI+ module/smart card by pressing
the green function buon CI Reset.
13 ISI mode
The numerous functions and added value make watching television with TechniSat
a wonderful and complex experience, with a wide range of possibilities. ISI mode cuts
down the large number of options and is therefore ideal for children or older people
who do not feel comfortable with the host of configuration options when operating
the device. If the mode is activated, it is no longer possible to accidentally make
changes with the remote control. At the same time, ISI mode displays simplified
channel information in large text on the screen for people with visual impairment
and, if desired, oers a clearly legible digital time display.
> Activate ISI mode in Main menu > Seings > Special functions > OSD > ISI
mode.
When ISI mode is active, the following functions are deactivated:
- Automatic updates
- Movies / DVR / music / pictures
- SFI / Timer
- UPnP renderer
Access to various menus is also blocked, however it is still possible to access
the menu to deactivate the ISI mode.
ISI mode can also be used with the IsiZapper remote control which is
optimised for ISI mode. Also see Section2.8 (optional IsiZapper remote
control).