TechniSat TECHNISTAR S6

55
EN
The picture sometimes
has square blocks
At times the device
switches to freeze frame
image, no sound. At times
the screen is black with
the message "no signal".
Heavy rain or snow Remove snow from
dish
Dish incorrectly aligned Re-align dish
Dish is too small at the
reception location
Use larger dish
There is an obstacle
between the dish and
the satellite (e.g. a tree)
Mount the dish in an
unobstructed position
No image, no sound,
display illuminates
Short-circuit in the
LNB connection
Switch o device,
rectify short-circuit
Switch device on again
Defective or missing cable
connection
Check all cable seings
Faulty LNB Replace LNB
Incorrect outdoor unit
set on the receiver
Modify seing
The antenna cannot be
rotated
Motor not suitable for
DiSEqC 1.2
Use suitable
motor
Texts, e.g. in the info box
or SFI plus detailed info,
are dicult to read at a
distance
Character size is set to
"small"
Adjust character size
Device has no
connection to the network
Incorrect network seings Check network seings
Network cable not
connected correctly
Check network
connection
Network connection not
allowed
Allow network connection
in Special functions >
Allow network.
DVR recording
no longer possible
Selected
storage medium is full
Delete existing
recording(s)
Insert and set another
storage medium.
DVR recordings cannot be
deleted
File system on the storage
medium is corrupt
Check storage medium
DVR recordings are not
displayed
Selected storage medium
is not inserted.
Insert set storage medium
Correct the storage
medium seing