EasyManuals Logo

TechniSat TECHNISTAR S6 User Manual

TechniSat TECHNISTAR S6
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
EN
2 Please read this first
Before connecting and using the device, first check that everything has been
supplied and familiarise yourself with the safety advice.
The scope of delivery for the TECHNISTAR S6 includes:
1 Digital receiver,
1 Quick start manual,
1 Remote control, baeries (2 pcs. 1.5V microcells)
1 Plug-in power supply unit.
1 HDMI cable
2.1 Intended use
The digital satellite receiver is used to receive digital satellite channels in the private
sector. It is intended exclusively for this purpose. Observe all the information in this
quick start manual, in particular the safety instructions. Any other use is considered
improper and can lead to property damage or personal injury. No liability is accepted
for damage resulting from improper use.
2.2 Safety instructions
For your own protection you should read the safety notes carefully before using the
device. The manufacturer accepts no liability for damage caused by inappropriate
handling, or by non-compliance with the safety precautions.
Function-related discharge current may occur with electrical equipment.
This is acceptable and poses no risk, even if it is experienced as a slight tingling.
To prevent such discharge currents, mains operated devices (receivers, TVs etc.)
must always be installed or connected with the power switched o, i.e.
alldevices must be disconnected from the mains.
- The device must only be operated in an appropriate climate.
- To ensure adequate ventilation, place the device on a flat, horizontal surface
and do not place any objects on top of it. There are ventilation slots here to
allow heat to be dissipated from the interior of the unit.
- Do not place any burning objects, such as lit candles, on top of the receiver.

Other manuals for TechniSat TECHNISTAR S6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TECHNISTAR S6 and is the answer not in the manual?

TechniSat TECHNISTAR S6 Specifications

General IconGeneral
Signal sourceEthernet (RJ-45), Satellite
Supported video modes576i, 576p, 720p, 1080i, 1080p
Digital signal format systemDVB-S, DVB-S2
Personal Video Recorder (PVR) included-
Tuner typeDigital
Product colorBlack
Number of tuners1 tuner(s)
Audio output channels- channels
On Screen Display (OSD)Yes
Audio formats supportedAAC, AC3, AIFF, FLAC, MP2, MP3, OGG, WAV
Image formats supportedBMP, GIF, JPEG, PNG, TIFF
Video formats supportedASF, AVI, M2TS, M4V, MKV, MOV, MP4, MPG, TS, TS4, XVID
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100 Mbit/s
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)4.8 W
Package weight1240 g
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width220 mm
Height45 mm
Weight600 g

Related product manuals