TechniSat VIOLA 2 C IR User Manual

46 47
DE
EN
5 Menu navigation
Navigation mostly involves using the Info/Menu buons and turning/pressing the
Selection knob:
Turning
> Navigating in menus (right: Scroll down, le: Scroll up), changing
values (right: Increase value, le: Reduce value).
Pressing > Confirm/save selection.
The menu is separated into the respective submenu for the selected source
containing the functions available for this source and the main menu for device-
specific seings.
Turn the Selection knob to navigate within menus. To confirm the selection, press
the Selection knob.
"*" highlights the current selection.
Press Info/Menu buon or Back buon to go back a step in the menus or seings.
Closing a menu: Press the Info/Menu buon repeatedly (depending on which menu
you are in) or wait approx. 15 seconds.
5.1 Main menu
You can use the main menu to access all of the Viola 2 C IR's functions and seings.
> Hold down the Info/Menu buon until the menu opens.
All the seings for the currently active source are now displayed to start with.
Use the Selection knob to select the System seings item and press the
Selection knob to open the system seings.
6 Internet radio
The Viola 2 C IR is equipped with an Internet radio receiver.
In order to receive Internet radio stations/broadcasts, you need a WiFi router with
Internet access.
> Press the Mode buon repeatedly until Internet Radio appears on the display.
Alternatively:
> Select Main Menu > Select Mode > Internet Radio
If you are starting Internet radio for the first time without having configured
a WLAN/WiFi connection, the search wizard appears which shows you all
the WLAN stations within range. Use the Selection knob to select the WiFi
network you recognise and enter the relevant password using the displayed
keyboard. Then select . If the password entered is correct, a connection
to the network is now established. The signal barin the status bar of the
display indicates whether the connection has been established. To do so,
please refer to Section 10.2.
4.4 General device functionality
4.4.1 Switching on the device
> Switch on the Viola 2 C IR by pressing the On/O buon (1).
Aer switching on for the first time, you need first to confirm the data
protection stipulations and, if required, then start the initial set-up wizard. To
do so, please refer to Section 10.3.
4.4.2 Switching o the device
> By pressing the On/O buon you can switch the device to standby mode.
This then displays the time. The display brightness in standby mode can be
adjusted as described in Section 10.5.
4.4.3 Selecting the source
> Press the MODE buon (2) to switch between the DAB+ (Digital Radio), FM,
Internet radio and Podcasts sources. Press the buon repeatedly to do so.
Alternatively:
> Hold down the Info/Menu buon until the menu opens.
> Use the Selection knob to select the Main menu item, then press the
Selection knob.
> Use the Selection knob to select the source you want then confirm your
selection by pressing the Selection knob.
4.4.4 Seing the volume
> Adjust the volume using the Volume knob. Turning to the right increases the
volume; turning to the le reduces it.
The set volume is shown on the display.
4.4.5 Retrieving visual displays
> By repeatedly pressing the Info/Menu buon, the following information can
be viewed and scrolled through:
Internet radio:
Description, language with location, Bit-rate with Codec and sampling rate, playback
buer, date.
DAB+
DLS: continuous text with additional information that the stations may provide, genre,
ensemble/multiplex (group name), station name with frequency, signal strength with
signal error rate, Bit-rate with Codec and sound format, date.
FM mode:
RT radio text (if transmied), PTY - programme type, frequency, date.

TechniSat VIOLA 2 C IR Specifications

General

Brand	TechniSat
Model	VIOLA 2 C IR
Category	Radio
Language	English