Technogym ARTIS DBK0EQ - Electrical Connection

ARTIS LINE with UNITY 4.0 Pre-Installation Requirements
Rev. 1.0
- 17 -PIR-00028-EN - Uncontrolled copy if printed
4.2 ELECTRICAL CONNECTION
Before connecting the product to the mains power supply, ensure that the electrical system speci-
cations comply to binding regulations.
For Run equipment: Check the specications of the mains power supply on the product identica-
tion label.
For Bike / Climb / Recline / Synchro / Vario equipment: Verify the main power supply specications
on the label a󰀩xed close to the main switch.
WARNING: The wall socket must be located in a place where the plugging and unplug-
ging can be done easily and safely.
The power supply socket must be grounded. If not, a ground connection must be installed
by a qualied electrician before connecting the equipment to the electricity mains.
The product must be grounded. The product plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING: Check with a qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with
the product; if it will not t in the outlet, have a proper outlet installed by a qualied
electrician.