12
Run Artis
B C
A
Safety devices and warnings
Fixed guard (A). Guards against access to the inside of the equipment.
STOP button (B). This button can be used to stop the equipment without having to use the normal controls.
Emergency switch (C)
. It has a cord with a peg to clip on to the user’s clothing as shown in the illustration below. Check that the peg grips onto clothing
suciently well to operate the emergency switch. The user operates the emergency switch if he/she moves too far away from the control panel, that is if the
cord becomes taught.
To restore all the equipment's functions after an emergency stop, reset the switch as shown in the illustration.
Before using the equipment, check that the stop device works correctly and attach the cord to your clothing with the clip provided.
To Next Page
Loading...
