17
Run Artis
Moving the equipment
The equipment has two xed front wheels. To move the equipment, lift it up
slightly, as shown in the illustration, and push it forwards and backwards.
To make it easier to move the equipment, we recommend adjusting the belt to
its highest gradient.
Do not lift the equipment too high, as this may damage the front frame.
Given the weight of the equipment, we recommend that more than one person
be involved in moving it.
If wheels cannot be used on the oor, move the equipment with normal lifting
and transport methods.
W
When lifting the equipment, do not grip the rear plastic housing,
but the frame under the side housings.
Move the equipment with great care to prevent it from tipping
over.
To Next Page
Loading...
