Technogym Artis Run - Page 20

20
Run Artis
Electrical connection
W
Check the state of the power supply cable periodically.
The wall socket must be located in a place where plugging and unplugging can be done easily and safely.
When plugging in, the switch on the equipment must be set to position 0 (the equipment must be switched o).
The power supply socket must be grounded
. If not, an earth connection must be installed by a qualied electrician before connecting the
equipment to the electricity mains.
The product must be earthed. If it malfunctions or breaks down, earthing provides a path of least resistance for electric current to reduce the risk of electric
shock. The product is equipped with a cable tted with an earth wire and earthed plug. The plug must be plugged into an appropriate outlet that is properly
installed and earthed in accordance with all local codes and ordinances.
W
Improper connection of the earth wire can result in a risk of electrical shock. Check with a qualied electrician or serviceman if you are
in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product; if it does not t in the outlet,
have a proper outlet installed by a qualied electrician.