14
06081018
Contents
Multipower
cont.
Unpacking
The equipment is supplied on a pallet, to
which it is secured by means of straps.
To remove the equipment from the
packing:
- cut the carton along the bottom and
pull it away from the top;
- remove the cellophane by pulling it
away from the top;
- untie the straps securing the
equipment to the pallet;
- lift each component and place it on
the ground;
- separate and lift the two frames,
rest them up against a wall or other
fixed object and support them until
the three cross-bars have been
assembled.
Identification of the manufacturer
and equipment
Description of the equipment
Technical data
Safety labels and devices
Packing
Place of installation
Unpacking
Assembling the equipment
Lifting and handling
the equipment
Securing the equipment
Adjusting the equipment
Routine maintenance
Replacing the weight plate posts
Technical Service
Storage
Disposing of the equipment
Using the equipment
To Next Page
Loading...
