Technogym ELEMENT Multipower - Page 21

21
06081025
D
C
Contents
Multipower
cont.
Securing the equipment
Warning
The brackets may be rotated
around the fastening axis to
facilitate subsequent wall-
fastening and then repositioned
correctly.
- mark the position of two 14 dia.
holes on the floor;
- drill the floor and insert rawl plugs (
C)
in the floor holes;
- rotate the brackets and ensure the
holes in the floor are aligned with the
holes on the bracket;
- fully tighten brackets to the frame;
- screw in screws (
D) and tighten to
the floor.
Identification of the manufacturer
and equipment
Description of the equipment
Technical data
Safety labels and devices
Packing
Place of installation
Unpacking
Assembling the equipment
Lifting and handling
the equipment
Securing the equipment
Adjusting the equipment
Routine maintenance
Replacing the weight plate posts
Technical Service
Storage
Disposing of the equipment
Using the equipment