Technogym KINESIS STATIONS - DESCRIPTION OF THE PRODUCT; Weight stack and workload selection; Power mode feature; Shoulder straps

7
KINESIS STATIONS
C
A
B
D
DESCRIPTION OF THE PRODUCT
The product has no sharp corners.
All parts which come into contact with the user's body are suitably protected with rubber coverings or padding.
The weight stack is covered on the outside by protective panels.
Weight stack (A). Each handgrip, operated by the user, moves the weights along two guides by means of a cable. A pin (B) is used to select the workload,
to adjust the amount of eort required.
Power mode (C). Eliminates the weight stack inertia in order to perform power and explosive strength exercises. Push the knob forward to activate the
mechanism; pull the knob back to disable it.
The Power mode device is optional.
Shoulder straps (D). They must be placed on your shoulders before doing the exercise.