Technogym Run Excite 900 - Electrical Connection and Safety; Connecting to Power Supply

05156018
23
Run
cont.
Electrical connection
Before connecting the equipment to the mains power supply, ensure that the electrical system specifications comply to binding
regulations. Check the mains power supply specifications on the label next to the switch.
Danger
The wall socket must be located in a place where the plugging and unplugging can be done easily and
safely.
When plugging in, the switch on the equipment must be in the OFF (0) position (i.e. the equipment must be
switched off).
Plug the power cable first into the equipment socket and then into the wall socket.
Warning
Check the state of the power supply cable periodically.