Technogym Skillmill Console - Page 68

• Wait for the le to copy (approx. 10 seconds);
• Disconnect the MINI USB cable from the console, the console will turn o after a few sec-
onds.
• Repeat the operations described above for all the software to be installed.
5. Reposition the guard of the console's MINI USB connector.
The “Skillmill” folder contains two sub-folders:
• 
following structure:
high_kit_WFW----BA-----version;
wi_WFW----CA-----version;
Low kit-----version;
Table-----version.
• 
following structure:
high_kit_WFW----BA-----version;
Low kit-----version;
Table-----version.
Skillmill
Technical Service Guide - Rev. 2.2
Page 68
e-mail: support@technogym.com