28
SKILLROW
RECHARGING THE BATTERY
The product is battery powered. To keep the product turned on, the grip must be actuated. If the display
turns o immediately when the movement is interrupted and does not turn back on, the battery must
be recharged.
Use the following type of power supply to recharge the battery:
24 Vdc 0,5A jack 5,5x2,1
.
W
Only use devices that comply with current regulations.
After 3 strong rows, the display must remain on for 1 minute. If it turns o after a few seconds, recharge
the battery.
If the display turns o after a few seconds even after the battery was charged, contact the Technical
Support Service.
To Next Page
Loading...
