10
Spazio Forma
Contents
05092010
A
To unpack equipment delivered in a cardboard pack, remove the staples that attach the external packaging to
the pallet, and then lift up the pack.
Check the pack visually to make sure it is in a good, complete state.
To free the contents, remove the three reinforcement
frames (A) from around the equipment.
Information
You are advised to keep all packaging materials for re-use in case of a move.
Warning
Observe the legally stated urban waste disposal procedures when disposing of the packaging material.
cont.
1 Technical information
1.1 Equipment identification
1.2 Description of the equipment
1.3 Installation and assembly
1.3.1 Place of installation
1.3.2 Unpacking
1.3.3 Assembly
1.3.4 Levelling
1.3.5 Moving the equipment
1.3.6 Electrical connection
1.3.7 Grounding instructions
1.4 Maintenance
1.5 Easily solved problems
1.6 Technical assistance
1.7 Storage
1.8 Scrapping
2 Using the Spazio Forma
3 Spazio Forma software
To Next Page
Loading...
