25
Spazio Forma
Contents
1.5 Easily solved problems
The following table lists a series of problems that may arise during normal use of Spazio Forma. If the solutions
given don't solve the problem, or if the problems are different, ask for help from the Technical Support Service.
Problem Cause Remedy
Equipment doesn't switch on
Power supply cable not plugged in
Mains power failure
Power supply cable damaged
Power supply cable connector not
plugged into equipment
Fuses blown
Plug the power supply cable into
the wall socket
Check the power supply in the
mains socket in question by
plugging in another appliance that
definitely works
Contact the Assistance Service
Plug the connector in
Replace the blown fuse with the
spare (see
section 1.4.2)
cont.
1 Technical information
1.1 Equipment identification
1.2 Description of the equipment
1.3 Installation and assembly
1.4 Maintenance
1.5 Easily solved problems
1.6 Technical assistance
1.7 Storage
1.8 Scrapping
2 Using the Spazio Forma
3 Spazio Forma software
To Next Page
Loading...
