Technogym Spazio Forma - Electrical Connection

19
Spazio Forma
Contents
05092020
1.3.6 Electrical connection
Before connecting the equipment to the mains power supply, ensure that the electrical installation complies
to binding regulations. Check the information printed on the sticker next to the socket and on the power supply
cable.
Danger
The power supply socket must be grounded . If not, a ground connection must be installed by a
qualified electrician before connecting the equipment to the electricity mains.
The wall socket must be located in a place where the plugging and unplugging can be done easily and
safely. When plugging in, the switch on the equipment must be in the 0 position (i.e. the equipment
must be switched off).
Plug the power cable first into the equipment socket and then into the wall socket.
Warning
Check the state of the power supply cable periodically.
1 Technical information
1.1 Equipment identification
1.2 Description of the equipment
1.3 Installation and assembly
1.3.1 Place of installation
1.3.2 Unpacking
1.3.3 Assembly
1.3.4 Levelling
1.3.5 Moving the equipment
1.3.6 Electrical connection
1.3.7 Grounding instructions
1.4 Maintenance
1.5 Easily solved problems
1.6 Technical assistance
1.7 Storage
1.8 Scrapping
2 Using the Spazio Forma
3 Spazio Forma software