63
Spazio Forma
Contents
3.7.3 Programming personal profiles
When the key is pressed you are prompted to select a profile for the workout.
select profile (1-6)
Press number keys 3 6 9 simultaneously to access personal profiles management.
profile (01-03) = 03
Type in the number of the profile to be saved with the number keys, then press ENTER to confirm. If the number
entered corresponds to a previously stored profile, this profile will shown in the goal dial display; if you proceed
at this point, the previously stored profile will be overwritten.
press 1 for power, 2 for CPR = 2
Press number key 1 to program a constant power profile, i.e. with constant speed and gradient values; or
number key 2 to program a constant heart rate profile.
select goal: TIME or DISTANCE
Press the key for the selected GOAL.
For the CPR profile you must select the execution mode:
press 1 to walk, 2 to run = 2
Press number key 1 to select a slow speed, i.e. the
walk
mode; or number key 2 to select a faster speed and
therefore the
run
mode.
cont.
1 Technical information
2 Using the Spazio Forma
3 Spazio Forma software
3.1 Description of the control panel
3.2 QUICK START workout
3.3 Cool down
3.4 Workouts with Goals:
Time, Calories, Distance
3.5 Constant heart rate workout
(CPR)
3.6 The fitness test
3.7 Profile workout
3.7.1 Predefined profiles
3.7.2 Personal profiles
3.7.3 Programming personal
profiles
3.8 Training with the Wellness Key
3.9 Performance index
3.10 Configuration menu
3.11 Other control panel messages
To Next Page
Loading...
