Need help?Do you have a question about the TechSide TS-T9+ and is the answer not in the manual?
Identifies radio display elements, icons, and physical parts.
Explains primary function keys and fundamental operations like power, transmission, and monitoring.
Details using alphanumeric keys, operating modes, and navigating menu settings.
Adjusts squelch, frequency step, and transmission power.
Configures battery saving, voice activation, and channel bandwidth.
Manages display backlight, keypad beep, and transmission time limits.
Configures CTCSS/DCS for private communication and interference reduction.
Sets personal ID, DTMF signaling, and signal codes.
Configures display appearance, channel lock, and keypad lock.
Adjusts frequency offset and manages channel storage.
Deletes stored channels and controls backlight behavior.
Configures alarm types and switches between VHF/UHF bands.
Manages dual-watch, repeater tones, and side tone elimination.
Sets power-on display messages and enables roger beep.
Manages keypad lock, FM radio tuning, and settings.
Activates rapid alarm, uses flashlight, and monitors signals.
Switches modes, sends 1750Hz tone, and uses reverse function.
Configures scanning and searches for CTCSS/DCS codes.
Configures repeater side tones and delay settings.
Sets power-on display content and enables roger beep.
Resets radio settings to factory defaults or initializes channels.
Configures scan resume modes and PTT ID transmission settings.
Sets PTT ID delay and configures channel display modes.
Enables busy channel lockout and automatic keypad locking.
General| Brand | TechSide |
|---|---|
| Model | TS-T9+ |
| Category | Transceiver |
| Language | English |
To Next Page