FIG. 6-1
A Left hand fuel filler cap: check visually for desired fuel level and secure. Left tank vent: check for
obstructions.
B Remove protection cap and check pitot mounted on left strut is unobstructed, do not blow inside
vents, place protection cap inside aircraft.
C Left side leading edge and wing skin: visual inspection
D Left aileron: visual inspection
E Left flap and hinges: visual inspection
F Left main landing gear; check inflation 14 psi (1.0 bar) or 40 psi (2.8 bar) , tire condition, alignment,
fuselage skin condition.
G Horizontal tail and tab: visual inspection.
H Vertical tail and rudder: visual inspection.
I Right side main landing gear; check inflation 14 psi (1.0 bar) or 40 psi (2.8 bar), tire condition,
alignment, fuselage skin condition.
L Right flap and hinges: visual inspection.
M Right aileron: visual inspection.
N Right leading edge and wing skin: visual inspection.
P Right side fuel filler cap: check visually for desired fuel level and secure. Right side tank vent: check
for obstructions.
Q Right side static port: check for obstructions, do not blow inside vents (read note).
To Next Page
Loading...
