Instructions for the installation, use and maintenance of Tecnicomar watermaker
VESSEL GROUP 2540 (fig. 1)
End plug for vessel 1 Hole
End plug for vessel 2 Holes
Half moon secure plate 3mm
Screw M6x10 AX TE TF DIN933
O ring for vessel 2521/2540
High pressure hose 3/8”(+fittings)
O-ring internal for pressure vessel
(*) only in one vessel(if vessels>1)
(**) only in one vessel (output)
VESSEL GROUP 2521 (fig. 1)
End plug for vessel 1 Hole
End plug for vessel 2 Holes
Half moon secure plate 3mm
Screw M6x10 AX TE TF DIN933
O ring for vessel 2521/2540
High pressure hose 1/4”(+fittings)
O-ring internal for pressure vessel
(*) only in one vessel(if vessels>1)
(**) only in one vessel (output)
MOTORIZED VALVE GROUP (fig. 2)
Motorized actuator 24 AC/DC
Ball valve for motorized actuator
High pressure hose 3/8”(+ fittings)
High pressure hose 1/4”(+ fittings)
Elbow ¼” – 9/16”
Elbow ¼” – 7/16”
201RX91614GNJI
201RX71614GNJI