Need help?Do you have a question about the Tecnomac EasyChill E20 and is the answer not in the manual?
Overview of manual, product compliance, intended use, manufacturer's disclaimer, and user restrictions.
Requirements for specialized technician installation and compliance with instructions.
Guidelines for lifting equipment and precautions during machine component handling.
Steps for removing packaging, checking for damage, and cleaning surfaces.
Essential safety precautions for operating the appliance safely.
Verifying appliance specifications against power supply details on the data plate.
Required information for reporting machine malfunctions or warranty claims.
Guidelines for placing the machine, ensuring it's level for proper operation.
Recommended ambient temperature and air circulation for optimal appliance performance.
Requirements for electrical connections, including circuit breakers and earthing systems.
Safe procedures for connecting the appliance to the main power supply.
Guidelines for connecting refrigeration components for remote assemblies.
Instructions for fitting the condensate/wash water drainage hose.
Checklist for technicians before machine start-up, including leak checks and tests.
Explanation of safety features like door microswitch, fuses, and pressure switches.
Compliance with WEEE directives for proper disposal of electronic waste.
Methods for safely shutting down the appliance in emergency situations.
General advice for efficient operation, including pre-cooling and loading.
Procedure for pre-cooling the cell before initial use or after periods of disuse.
Guidelines for arranging food products for optimal air circulation and chilling.
Explanation of the compressor sump pre-heating phase during first start-up.
Procedures for powering on, off, and the appliance's self-test sequence.
Step-by-step guide for soft blast chilling using core probe temperature.
Instructions for soft blast chilling based on a pre-set time duration.
Overview of the two-stage process for accelerating chilling in hard blast chilling.
Guide for hard blast chilling using core probe temperature to reach target.
Instructions for hard blast chilling based on a pre-set time duration.
Guide for blast freezing using core probe temperature to reach -18°C.
Instructions for blast freezing based on a pre-set time duration.
Procedure for setting the appliance's date and time through the control panel.
Instructions for using the function to harden ice cream surfaces.
Methods for silencing the beeper and resetting active alarms.
How to store and recall processing programs for consistent product characteristics.
Procedure to view the three most recent HACCP alarms with details.
How to print data from the last work cycle or HACCP information.
Instructions for activating continuous fan operation regardless of door status.
How to manually initiate a defrost cycle for the appliance.
Information on the automatic defrost cycles performed during storage periods.
How to use the UV-C lamp to sterilize the interior of the appliance.
Accessing and modifying configuration parameters for the appliance.
Table detailing the adjustable parameters for user configuration.
Instructions for operating the optional printer, including paper loading and tests.
Overview of the system for indicating safety device interventions via signals.
Detailed descriptions of various alarms managed by the appliance's software.
Alarm triggered by operating range exit or probe defect.
Alarm for core probe issues during temperature-based chilling cycles.
Alarm for cell probe issues, affecting current chilling or storage phases.
Alarm for optional probes, disabled if not connected.
Alarm due to door microswitch fault or prolonged door opening.
Alarm related to pressure switches or thermal-magnetic switch faults.
Alarm for water-cooled models' hydrostat or pressure switch intervention.
Alarm for compressor automatic reset issues on specific models.
Alarm related to voltage input issues on specific models.
Alarm for water-cooled unit hydrostat intervention due to lack of water.
Alarm triggered if cell temperature exceeds set points during storage.
Alarm indicating a power failure or blackout condition.
Alarm warning about compressor operating hours for maintenance.
Alarm for failure to reach target temperature within the set timeout.
Alarm indicating a pressed button when the panel is switched on.
General information on alarm display, silencing, and persistence.
Safety rules to ensure safe practices during cleaning and maintenance.
Instructions for cleaning the condenser to maintain efficient air circulation.
Procedures for frequently cleaning the appliance's interior for hygiene.
Guidelines for cleaning the unit cabinet using specific solutions.
Steps to access the evaporator for performing cleaning procedures.
Ensuring proper drainage of water from the evaporator during defrost.
Instructions for periodic cleaning of the air condenser filter for specific models.
To Next Page
General
