Need help?Do you have a question about the Tecnomac EasyChill E10 and is the answer not in the manual?
Provides essential information for correct installation, operation, and maintenance of the machine.
Details requirements for installation by specialized technicians and compliance with instructions.
Outlines procedures for loading, unloading, and handling machine components safely.
Explains how to remove packaging, check for damage, and prepare the machine.
Lists crucial safety rules for operating and maintaining the appliance to prevent hazards.
Instructs to verify power supply data on the machine's data plate against available power.
Specifies information required when reporting machine malfunctions or claims to the dealer.
Details requirements for safe and level machine placement, including using lifting equipment.
Defines maximum ambient temperature for operation and ventilation requirements.
Covers requirements for circuit breakers, cable specifications, and earthing connections.
Addresses power line sizing for remote assembly installation distances.
Specifies the required diameter and type of hose for condensate drainage.
Lists checks for installation technicians before machine start-up, including gas leaks and wiring.
Describes various safety and control features like door microswitch and pressure switches.
Provides guidance on the proper disposal of WEEE according to directives.
Explains how to safely shut down the appliance in emergency situations.
Offers advice for optimal performance, including pre-cooling and loading techniques.
Details pre-cooling procedures for first-time use or after disuse to reach optimal temperature.
Provides guidance on arranging food products for effective air circulation and proper loading.
Explains the 2-hour pre-heating phase for the compressor sump on initial start-up.
Describes how to switch the appliance ON/OFF and the self-test sequence.
Details the process and parameters for soft blast chilling food by core probe temperature.
Explains how to perform soft blast chilling using a pre-set time duration.
Describes the two-stage process of hard blast chilling for accelerated cooling.
Details the procedure for hard blast chilling based on core probe temperature.
Explains how to perform hard blast chilling using a pre-set time duration.
Details the process for blast freezing food to a specific core probe temperature.
Explains how to perform blast freezing using a pre-set time duration.
Details how to set the appliance's date and time using the control panel buttons.
Explains the function for surface hardening ice cream products.
Describes how to mute beepers and reset alarms on the appliance.
Explains how to store and recall processing programs for consistent results.
Details how to view the most recent HACCP alarms, including date, time, and type.
Explains how to print data from the latest work cycle or HACCP logs.
Describes how to activate forced ventilation for continuous fan operation.
Explains how to initiate a manual defrost cycle for the appliance.
Explains the automatic defrost cycles performed during storage.
Details the function of the UV-C lamp for sterilizing the interior of the cell.
Guides users on accessing and modifying programming parameters.
Lists and explains various user-configurable parameters for the appliance.
Provides instructions for operating the optional printer, including paper loading and print tests.
Explains the system for acoustic and visual signals indicating safety device interventions.
Lists and describes various software-controlled alarms and their causes/effects.
Provides general information on how alarms are displayed, activated, and reset.
Lists common operating faults and their corresponding solutions, requiring technician assistance.
Recalls safety regulations to ensure safe cleaning and routine maintenance operations.
Details how to clean the condenser regularly for efficient air circulation and operation.
Provides instructions for frequent cleaning of the cell interior to maintain hygiene and food quality.
Guides on cleaning the unit cabinet using a soft cloth and mild detergent.
Ensures proper drainage of defrost water into the collecting tray, checking for clogs.
Explains how to access and clean the air condenser filter periodically.
To Next Page
General
