Need help?Do you have a question about the Tecnomac MT and is the answer not in the manual?
Details the installation process and requirements for the machine, referencing specialized technicians.
Crucial safety rules to be followed by the user to prevent accidents, such as avoiding wet conditions.
Details the requirements for connecting the appliance to the power supply via a dedicated circuit breaker.
Checks and information required for the installation technician before appliance startup and customer handover.
Explains the various safety features and control systems, like door microswitches and pressure switches.
Instructions for performing soft blast chilling using temperature control for pre-cooked or hot foods.
Instructions for performing soft blast chilling using a preset timed control.
Instructions for performing hard blast chilling using temperature control for dense food products.
Instructions for performing hard blast chilling using a preset timed control.
Instructions for performing blast freezing using temperature control to reach -18°C.
Instructions for performing blast freezing using a preset timed control.
Details on the evaporator probe alarm, its cause, beeper, display, and reset procedure.
Details on the core probe alarm, its cause, effect on cycles, and reset procedure.
Details on the cell probe alarm, its cause, effect on cycles, and automatic reset.
Alarm triggered when cell temperature consistently exceeds set limits during storage.
Alarm when chilling or freezing time exceeds the set limit without reaching the target temperature.
To Next Page
General