To Next PageTo Next Page
Need help?Do you have a question about the TECNOMAGNETE ST100F and is the answer not in the manual?
Defines roles and qualifications for personnel performing operations and maintenance.
Specifies qualifications for operators and maintenance technicians.
Lists required PPE and safety clothing for safe operation.
Outlines general safety rules and responsibilities for compliance.
Details prohibited uses and consequences of misuse.
Covers essential safety aspects like grounding, protection switches, and power supply requirements.
Details how to connect ST100 controllers to a single-phase power supply.
Information on the supplied power cable and voltage drop considerations.
Guidance on choosing appropriate discharge cables to prevent overheating.
Lists fuses and their dimensions for the ST100 model.
Explains how to connect ST200 controllers to single-phase or three-phase power.
Details the enabling device on the ST200 controller and its connection for magnetic chuck control.
Step-by-step procedure for starting and operating the ST100 controller.
Step-by-step procedure for starting and operating the ST200 controller.
Outlines crucial safety precautions and PPE for maintenance tasks.
Provides a table for identifying and resolving common operational problems.
General| Input Voltage | 24 V DC |
|---|---|
| Protection Class | IP65 |
| Rated Adhesion Force | 10000 N |
| Holding Force | 10000 N |
| Material | Steel |
