TECNOMAGNETE ST100F - Improper or non-permitted use

35
Instruction and maintenance manual
ENGLISH
1.12 Improper or non permitted use
The controller is not designed and has not been
manufactured to be used in explosive environ-
ments.
An improper use may:
• Cause injuries to personnel.
• Damage the controller or any other equipment
connected to it.
• Affect the reliability and performance of the
controller.
In particular, it is essential to adhere to the fol-
lowing instructions:
• Always use suitable working parameters.
• Carry out the required maintenance in accord-
ance with the instructions provided.
• Use suitable equipment.
• Comply with all the instructions provided.
• Fix the unit onto a stable surface.
• Contact TECNOMAGNETE S.p.A. in case of
doubt to determine whether a specific opera-
tion is permitted.
1.13 Nameplate data
The controller is tted with an identication label in
compliance with current laws.
ATTENTION
The nameplate should never be removed even if
the unit is resold.
If the nameplate is damaged or has been
removed, it is necessary to contact
TECNOMAGNETE S.p.A. to order a duplicate.
Always quote the model printed on the
nameplate in all communications with
TECNOMAGNETE S.p.A.
Failure to comply with the above instructions
shall entitle TECNOMAGNETE S.p.A. to disclaim
any responsibility for injuries to personnel and
damage to equipment, making the user fully re-
sponsible before competent authorities.