- 23 -
Bulbs
Replacing the halogen bulbs 11.1
Before carring out any kind of maintenance work, disconnect the appliance from the domestic electrical supply.
Phase 1
- To replace the halogen bulbs B, remove the glass cover C using
a screw driver in the slots provided.
Replace the bulbs with new ones of the same type.
CAUTION!
Do not touch the bulb with bare hands.
- Put in completely when assemblying glass.
Note!
• The light on the cooker hood is designed for use during cooking and not for prolonged use for general room
illumination.
Prolonged use of the light considerably reduces the average life of the bulbs.
B
C
To Next Page
Loading...
