- 32 -
1
B
C
A
D
B
2
3
4
Motor
Replacing the motor 15.1
Before carring out any kind of maintenance work, disconnect the appliance from the domestic electrical supply.
Before proceeding with replacement of the motor, the following
steps must be carried out:
- Remove the 2 srews B fixing the upper decorative duct A to the
wall fixing bracket C.
- Put the uyper decorative duct A inside the lower one D.
- Remove the 2 decorative ducts plaicing them on a level surface.
CAUTION!
Wear gloves during the installation of the product otherwise inju-
ry at ngers could happen by sharp edges.
To Next Page
Loading...
