User’s manual - TECO 22 - 23 - 25 - 27 Special 19
MOUNTING
CAUTION
Always check that the tyre/rim combination is correct in terms of compatibility (tubeless tyre on
tubeless rim; tube type tyre on tube type rim) and geometrical size (keying diameter, cross-section
width, Off-Set and shoulder prole) before mounting.
Also check that rims are not deformed, that their xing holes have not become oval, that they are
not scaled or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
• Tyre preparation (g. 18)
- Grease both the tyre beads.
- Place the tyre on the rim
• Head positioning
- Set the mounting bar in work position
NB: The tool is already in the correct position for mounting the tyre, unless the type of rim
has been changed.
16
17
18
19
To Next Page
Loading...
Need help?
General
