EC DECLARATION OF CONFORMITY
WE,
Teco Srl
Via Pio La Torre 10
42015 Correggio (RE)
Italy,
DECLARE UNDER OUR SOLE AND EXCLUSIVE RESPONSIBILITY THAT THE MACHINE:
TYPE:
tyre changer
MODEL:
SERIAL No.:
serial number
TO WHICH THIS STATEMENT REFERS AND FOR WHICH WE HAVE PREPARED AND HOLD THE RELATIVE TECH-
NICAL BOOKLET, COMPLIES WITH THE BASIC REQUISITES DEFINED BY THE FOLLOWING EUROPEAN UNION
DIRECTIVES:
- 2006/42/EC;
- 2014/35/EU;
- 2014/30/EU;
- 2011/65/EU;
- 2014/29/EU*.
*Only valid for the version with T.I.
THE FOLLOWING HARMONISED STANDARDS HAVE BEEN APPLIED TO VERIFY COMPLIANCE WITH THE FOL-
LOWING DIRECTIVES:
EN ISO 12100:2010; EN 60204-1:2006/AC:2010; EN 61000-6-2:2005/AC:2005;
EN 61000-6-3:2007/A1:2011/AC:2012
Correggio, 01/04/2016
TECHNICAL DIRECTOR
Ing. Mauro Barbetti
THE TECHNICAL DOSSIER RELATIVE TO CONSTRUCTION WILL BE KEPT AND WILL BE RENDERED AVAILABLE
BY ING. MAURO BARBETTI, C/O TECO SRL, VIA PIO LA TORRE , 10 42015 CORREGGIO (RE) ITALY.
IMPORTANT:THIS DECLARATION SHALL NO LONGER APPLY IF CHANGES ARE MADE TO THE PRODUCT WITH
RESPECT TO ITS CONFORMATION AT THE TIME OF SALE OR IF CHANGES ARE MADE TO THE COMPONENTS
WITHOUT THE PRIOR AUTHORIZATION OF THE MANUFACTURER, OR IN THE CASE OF NON-COMPLIANCE
WITH THE INFORMATION CONTAINED IN THE USER MANUAL.
THE MODEL FOR THIS DECLARATION COMPLIES WITH WHAT IS SET FORTH IN EN ISO/IEC 17050-1 AND EN
ISO/IEC 17050-2
To Next Page
Loading...
Need help?
General
