TECO S.r.l. – Via G. Ricci Curbastro, 8 – 48124 Fornace Zarattini – Ravenna (Italy) – Tel. +39 0544 408333 – Fax +39 0544 280084 www.tecoonline.com
info@tecoonline.com Reg.Imprese di Ravenna, C.F. e P.IVA 01075610392 –R.E.A.n.118737 - Cap.Soc. 60.000 Euro – Registro A.E.E. IT08020000002839
The information contained within this manual may be subject to changes without prior notice by TECO.
Pag. 8 di 15
1.2 PERSONNEL QUALIFICATIONS
All personnel involved in the operation, installation, inspection, and maintenance of the appliance must be
qualified to perform their assigned tasks. If the personnel do not already possess the necessary knowledge
and skills, appropriate training and education must be provided. Always organize repair activities with
consideration for the activity, health, and safety of the personnel, and ensure compliance with all safety
requirements for the appliance, adhering to the regulations and laws in force concerning safety and health.
REQUIRED QUALIFICATIONS:
CERTIFIED REFRIGERATION TECHNICIAN FOR USE WITH FLAMMABLE REFRIGERANTS:
Qualified technician capable of working on refrigeration systems containing flammable refrigerants.
1.3 WARRANTY
The appliances manufactured by TECO S.r.l. are covered by a WARRANTY provided by the authorized
dealer from whom the purchase was made, as required by the legal provisions of the country in which they
are marketed. If, during the validity period, there are faulty operations or malfunctions of appliance parts that
fall within the warranty terms, the authorized dealer, after appropriate checks on the appliance, will proceed
with the repair or replacement of the defective parts. To claim warranty coverage, it is necessary to provide
the documentation required by the legal provisions of the country in which the appliance is marketed, and
comply with the conditions specified by your dealer or TECO's authorized service center.
1.4 MANUAL ORGANIZATION/CONSULTATION METHODS
1.4.1 MANUAL STRUCTURE
The manual is divided into chapters, which gather all the necessary information by topic to use the product
without any risk.
1.4.2 DESCRIPTION OF PICTOGRAMS
The purpose of safety signage is to quickly and easily draw attention to areas where it has not been possible
to eliminate residual risks inherent in operation. Below are the safety symbols applied and their meanings:
WARNING: This symbol indicates safety regulations for the operator and/or any exposed
individuals.
CAUTION: This symbol signifies the possibility of causing damage to the product and/or its
components.
NOTE: This symbol conveys useful information.
This symbol is a warning and indicates a fire hazard or flammable material.
This symbol is a warning and indicates an electrical hazard.
This symbol indicates an earth terminal for protection against electrical shocks.
This symbol indicates to read the manual carefully.
1.5 PRODUCT DESCRIPTION
The appliance is suitable for cooling the water contained in tanks for domestic and/or commercial sports
recovery. The appliance must not be used for purposes other than those specified above. Using it for purposes
other than its intended use may lead to hazardous conditions.
To Next Page
Loading...
